|Crab Louie's Recent Refits/Upgrades
|| Crab Louie's Home Page | N6RFM Home Page ||
|| Bottom of Page||
| System | Date | Refits/Replacements/Upgrades |
| Boom | 6/14/2008 | Schaefer 90-28 2 3/4 x 3 1/2" stainless forged bail; Harken 57 mm H2621 Carbo fiddle at boom and 57 mm H2624 Carbo fiddle with cam and becket at base of mast; 3/8" yacht braid control line |
| 12/26/2009 | second Schaefer 90-28 2 3/4 x 3 1/2" stainless forged bail | |
|
|
||
| Cabin | 4/13/2008 | Thetford 735 porta potty |
| 5/1/2008 | 5/8" line from water tank to sink | |
| 5/3/2008 | Whale Flipper Pump MK4 (self priming lever operated hand pump) in galley | |
| 5/21/2008 | Installed a West Marine class D DSC VHF650 radio | |
| 5/2-9/2009 |
Pyle PLMR24 stereo speakers; Sony CDX-M50IP AM/FM/CD/iPod Marine stereo in a Scosche underdash enclosure under the "nav" table. |
|
| Cockpit | 5/30/3009 | Raymarine ST1000+ tiller pilot.; remote receptacle in cabin |
| Canvas |
|
|
| - main sail | 5/10/2008 | Neil Pryde Contender 7.4 oz Cruising Plus from DiMattia Sails |
| - headsails | 2/15/2008 | storm jib , 120 and 150 cleaned by SailCare; repaired boltrope on storm jib |
| - asymmetric | 12/24/2008 | lightly used asymmetric from Bacon Sails; leech 28'9", foot 18'7"; Chutescoop sleeve; 3/8" Cajun XLE sheets |
| - headsails | 6/20/2009 | 120 and 150 headsails modified by DiMattia Sails with #6 luff tape |
| - headsail cover | 7/19/2009 | 30' ATN genoa sleeve (Pacific Blue) |
| Engine | Winter 2008-2009 | 1993 Yamaha T9.9EXHR - cleared power head flow obstructions, replaced internal zinc anode, rebuilt carburetor, adjusted valve clearances, new throttle cable, repaired water pump housing, new impeller, new tube from water pump to lower unit |
| Winter 2009-2010 | lower unit from 1995 EXHT | |
| Mast | 7/6/2008 | stainless RWO-Marine R4252 spinnaker pole mast ring |
| Rigging | ||
| - standing | 8/2000 | new standing rigging by PO |
| - running |
4/19/2008 |
3/8" Stay Set-X main and jib halyards, Cajun XLE spinnaker halyard with Harken 001 block |
| - traveler | 6/19/2008 | 3:1 purchase control line system (Nicro-Fico X-track NF-599 A3 conversion kit from Rig-Rite) |
| - furler | 6/19/2009 | Alado A2 headsail roller furling system; 5/32" Cajun XLE furler control line; Harken 7404 lead block kit |
| Rudder | 4/18/2009 | rudder with a stainless steel shaft from D&R Marine; bearings and SS collar |